Basic Set Up
MIN/MAX Values
Set Time and Date
Set Wake Alarm
Weather Tendency
Aire Pressure History
History Function
Setting Weather Alarms
Rain Function
Wind Function
 
 

Step 6: Air Pressure History

The bottom section of the LCD also shows the relative air pressure value and the air pressure history. Depending on programming conditions, display of the history of air pressure in form of a graph consisting of vertical bars. The bar graph of the electronic barometer shows the air pressure history of the past 12 hours in five 3-hour steps.

The horizontal axis represents the last 12 hours air pressure recording (- 12 , - 9 , - 6 , - 3 and 0 hour) . The bars are plotted at each of the 5 steps and give the trend over the recorded period. The scale on the right compares the result. The " 0 " in the middle of this scale determines the current air pressure.

The vertical axis represents the air pressure changes in hPa (+4, +2, 0, -2, -4. “0” represents the current air pressure). The newly measured pressure was compared to the previously recorded pressure reading. The pressure change is expressed by the difference between the current ("0h") and the past readings in division of ±2 hPa or ±0.06 inHg. If the bars are rising it indicates that the weather is getting better due to an increase in air pressure. If the bars go down it indicates a drop of the air pressure and the weather is expected to get worse from the present time " 0 " .

At every full hour the current air pressure is used as a basis for the display of a new graph bar. The existing graph is then moved one column to the left.

Continue with
Step 7: History Function

 
     
View 1600 Features  

Step: 1 2 3 4 5 6 7 8 9 10

 
_